High-performance	Reliability
Ease of use	Value for money

The splinter guard can only be used for certain saw blade types and only for cutting angles of 0°. When sawing with the splinter guard, the base plate 7 must not be moved back for cuts that are close to the edge. Press the splinter guard 22 from the bottom into the base plate 7. PST 1000 PEL (see figure C): When using the sliding shoe 11, the splinter guard 22 is not inserted into the base plate 7, but into the sliding shoe. "Cut Control" enables precise guiding of the power tool along a cutting line marked on the workpiece. The "Cut Control" kit includes the viewing window 12 with cutting marks and the base 13 for attachment to the power tool. 24 | English Attaching "Cut Control" to the Base Plate (see figure D) Clamp the "Cut Control" 12 viewing window into the holders of the base 13. Then, lightly press the base together and allow it to engage into the lead 23 of the base plate 7. Attaching "Cut Control" to the Sliding Shoe (PST 1000 PEL) (see figure E) With this cutting-line control system, the "Cut Control" viewing window 12 can either be fastened together with the base 13 to the base plate 7 or separate, directly in the holder of the sliding shoe 11. remove the "Cut Control" base 13 from base plate 7. For this, lightly press the base together and remove it from the guide 23. Pull off the "Cut Control" viewing window 12 from base 13 and clamp it into the holders on the sliding shoe 11. Dust Cover (see figure F) Mount the dust cover 10 before connecting the machine to the dust extraction. Mount the dust cover 10 to the machine in such a manner that the prongs engage into the openings of the housing. Remove the dust cover 10 for applications without dust extraction as well as when performing mitre cuts. For this, push the dust cover together at the two outer holders and pull it off toward the front. An overview for the connection of various vacuum cleaners can be found at the end of these instructions...